banner



How To Draw A Lily Flower Easy

Download Commodity

Download Article

Lilies are cute flowers with an elegant yet simple shape, making them relatively easy to sketch. At that place are several different techniques you tin can use to depict a lily, so experiment until you find the method that works best for you.

  1. 1

    Draw a circumvolve fastened to a line. Sketch a small-scale circle, so describe a long, slightly curved line extending down from the 5-o'clock position of the circle.

    • The circle will become the bud of the lily and the line volition become the stem.
    • Connect the line directly to the outline of the circle and make it roughly v to seven times longer than the circle diameter.
  2. ii

    Adapt seven brusk lines in the eye of the circle. Depict seven brusque, slightly curved lines extending outward from the center of the circle.

    • These lines will fix the direction of the lily petals.
    • The curve of each line should open slightly downward.
    • The lines do not need to be fifty-fifty in size, only they should range from ane-4th to one-half the size of the stem. Note that the lines pointing opposite the stem should be longer than those straight next to information technology.
    • The lines do not need to exist symmetrical, either, but they should be spaced apart at relatively fifty-fifty intervals.

    Advertizement

  3. 3

    Environment the petal lines with contours. Draw an outline around each petal line, allowing the contours to run across and overlap most the middle of the blossom.

    • These contours will go the petals.
    • Eye the petal line inside each profile, keeping an even corporeality of space on either side of each line. Note that the amount of space between center lines and contours may vary from petal to petal.
    • The contours should touch without intersecting ane another. If you do cross some of the contours, you'll demand to erase the intersecting segment later.
  4. 4

    Flesh out the necessary lines. Erase the initial petal lines, leaving the contours in place. Correct the petal contours as needed to make each one wait more realistic.

    • Some contours may non demand any adjustments, while others will. In particular, you should try to narrow the tips of the contours to prevent them from looking like perfect ovals.
    • Add detail to the stem during this pace, also. Make the bend announced sharper, and describe a parallel line to ane side of the original line to give the stem width.
  5. 5

    Add leaves to the stems. Sketch several leaves on both sides of the stem. Y'all'll only demand roughly v to eight.

    • Vary the direction and size of each leaf. Each should await similar narrow, curved teardrops. Some should curve upward while others should curve downward.
    • Practice not depict the leaves in even pairs. Space them apart at random intervals.
  6. half dozen

    Create more item within the blossom. Describe the stamen in the heart of the lily and lightly sketch line markings inside each petal.

    • The stamen will look like a cluster of short, narrow stems, and each stem should have a minor rounded block at the tip. Identify 5 to viii of these shapes within the centre of the lily, making it no higher than the largest, about upright petal.
    • For the petal lines, lightly sketch two to iii lines in each petal that highlight the direction of the petal. these lines should just occupy office of the petal interior, though, and should not extend from the base to the tip.
  7. 7

    Shade or color the lily equally desired. By this indicate, you should already accept a completed lily course. You tin can add together shading or colors to the picture to make it even more realistic.

    • To add together shading, try to visualize which areas of the lily would receive direct light if it were real. Whatsoever area that would not become hit with calorie-free should exist shaded, with the darkest areas existence those hidden by other parts of the bloom.
    • If yous want to add color, apply lighter shades on the areas that would receive direct sunlight and darker shades on those that would exist hidden in shadow.

    Advertisement

  1. 1

    Depict a circumvolve. Sketch a circle in the centre of your paper, making the diameter approximately 1-tertiary every bit big as you wish to make the finished lily.

    • This circle will become a subconscious bud or base for the lily petals. You'll need to draw over it, and then keep the pencil lines lite enough to erase later.
  2. 2

    Add two petals to the correct of the circle. Draw ii trumpet-shaped petals, placing them on the right side of the circle.

    • Trumpet-shaped contours are similar to teardrop-shaped contours, but the outlines should be curvier.
    • Both petals should be roughly twice as large equally the circle.
    • The wide portion of one petal should betoken upward with the tip pointing down. Place this petal directly over the correct side of the circumvolve, assuasive information technology to slightly overlap the circumvolve itself.
    • The wide portion of the other petal should point down with the tip pointing up. It should touch the side of the circle and the side of the other petal.
  3. 3

    Place ii more petals on the opposite side. Draw 2 more than trumpet-shaped petals, placing them on the left side of the circumvolve.

    • Depict the elevation petal commencement, followed by the bottom one. Both petals should be attached to the contours of the first two, and the base of each one should be hidden below the existing petals.
    • The size of these petals should roughly match the size of the original two, and they should completely cover the remaining width and top of the circumvolve.
    • Angle these petals in the same general direction as the first two petals.
  4. 4

    Sketch out two more petals. Place two small, pointed petals in between some of the other pairs. The first should go in between the elevation two petals. The second should go in between the two left petals.

    • These petals should be slightly curved just slightly straighter than the others.
    • Only depict the tips of each petal. Doing so makes it appear as though the lower portions are hidden past the upper petal layers.
  5. v

    Draw eye lines downward each petal. Carefully describe a smooth line down the center of each existing petal contour.

    • Go on each line in the center of its respective petal and curve the line forth the curve of the petal. Extend information technology from base of operations to tip, too.
  6. half-dozen

    Create the stamen. Draw five to seven lines sticking out from the center of the lily. Draw small, apartment ovals at the cease of each line to end the stamen.

    • Each of these lines should be no longer than half the length of the longest petal.
    • Position the stamen so that they indicate out to the left. Let the top few curve upward, merely give the lesser few a slight curve downward.
  7. 7

    Attach the horn-shaped stalk. Draw a horn shape coming from the base of operations of the flower, then sketch a downward pointing stem at the base of this horn.

    • The horn should look like a "V" tips on its side. Point the wide portion toward the original circle and hide it beneath the petals. Bending the narrow portion away from the petals and do not shut off the tip.
    • From the narrow tip, draw 2 parallel, curves lines. Both lines should point downwards. These volition be the stem of the bloom.
  8. 8

    Clean up the drawing. Erase your starting circumvolve and any other stray lines. Leave the lily as information technology is or add other details as desired.

    • Consider calculation long, slivered leaves extending upward from the base of the stem.
    • Add shading or coloring to the movie, if desired. Utilise lighter shading or colors on the areas receiving direct light, but use heavier shading or darker colors on any expanse subconscious past shadow.

    Advertisement

  1. one

    Draw a ring of ovals. Lightly sketch six ovals, arranging them into the form of a ring.

    • These ovals will become the petals of the lily.
    • The narrow ends of each oval should point toward the heart, rather than lying against the perimeter of the ring.
    • Allow the ovals to slightly overlap at the middle of the ring.
  2. 2

    Define the shape of each petal. Go back over each oval, altering the outline slightly to define the petal shape.

    • For each petal, you'll demand to make the blunt, rounded tip a little more pointed. You should as well curve the sides of each petal slightly. Each petal should curve in toward the right.
    • While defining each petal outline, you lot should also decide how the petals fall. The petals on the right are "closer" to the viewer, and then the total outlines should exist visible. Equally the petals progress toward the left, the overlapping sections volition be "hidden" beneath the closer petals.
  3. 3

    Sketch the stamen. Depict 4 curved line pairs (viii lines total), starting each ready in the heart of the lily. Tiptop each pair with a modest oval.

    • These will be the stamen of the lily.
    • Keep the lines inside each pair close together. The oval at the peak of each pair should close off the lines, making the resulting shape appear solid.
    • Each stamen should curve slightly downward. Try to make them about one-half as long as the lily petals, and keep them relatively fifty-fifty in length.
  4. 4

    Connect two lines to the base of the lily. Depict 2 slightly curved lines at the lesser of the lily. These lines should both fall in betwixt the same two petals on the lesser right side.

    • These lines volition create the stem of the lily.
    • Both lines should curve abroad from the blossom. The space in between the lines should exist slightly wider at the peak and narrower toward the bottom.
  5. five

    Detail each petal. Describe a unmarried line downwards the length of each petal. Position each of these lines in the center of its respective petal.

    • The lines should span virtually of the length without actually touching the bottom or top of each petal.
    • Each line should follow the curve of its corresponding petal.
  6. 6

    Erase any stray marks. Darken the lines you lot wish to proceed past tracing over them again in pencil. Erase any lines you lot do not wish to keep, working advisedly to avoid the permanent lines.

    • If yous exercise erase one of your permanent lines by accident, redraw the line as soon as you lot notice the mistake.
  7. vii

    Shade or colour the lily every bit desired. the shape of the lily is already done. If y'all desire to brand information technology more realistic, though, you could shade it with pencil or colour it in.

    • Regardless of which option you choose, endeavor to visualize how the lily would look in natural light. Whatsoever area that would come into direct contact with a calorie-free source should be kept lighter, but whatsoever surface area that would be hidden in shadow should exist fabricated darker.

    Advertizing

Add New Question

  • Question

    What is the colour of a lily?

    wikiHow Staff Editor

    This answer was written by i of our trained team of researchers who validated it for accurateness and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Answer

    Lilies come in many different colors, just the about mutual are white, pinkish, xanthous, red, and orangish.

  • Question

    What'south an easy fashion to draw a lily?

    wikiHow Staff Editor

    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Reply

    The rounded figure technique is very piece of cake. Just sketch in the bones shapes of the petals around a circular centre, then add the details, such as the stem, leaves, and stamens. When you lot're done, erase the sketchy guidelines y'all used to rough in the basic shapes.

  • Question

    How do you draw a tiger lily?

    wikiHow Staff Editor

    This respond was written by i of our trained team of researchers who validated information technology for accuracy and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Answer

    Tiger lilies are bright orange, with nighttime brownish spots on the leaves. Draw the lily the same style you lot would any other lily, simply brand the petals curve back and draw in some long stamens. Shade the petals in orange, and then depict parallel rows of elongated brown spots on each petal.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

Thanks for submitting a tip for review!

Things You'll Need

  • Pencil
  • Eraser
  • Newspaper

About This Commodity

Article Summary X

To describe a lily, start by sketching a pocket-size circle with a long, curved line coming down from the 5 o'clock position for the flower'south bud and stem. Then, depict 7 brusk, slightly curved lines extending outward from the circle at fairly even intervals. Next, depict an outline around each of the 7 lines to form the petals, letting these lines encounter and overlap near the circle. After you draw the petals, erase the initial petal lines and sketch 5-8 leaves coming off the stem in random spots. Finally, draw a cluster of short, narrow stems in the eye for the stamen. To learn how to draw a lily using rounded-figure or guided freehand technique, keep reading!

Did this summary help y'all?

Thanks to all authors for creating a page that has been read 93,227 times.

Did this commodity assist you?

Source: https://www.wikihow.com/Draw-a-Lily

Posted by: freemanslingly1956.blogspot.com

0 Response to "How To Draw A Lily Flower Easy"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel